Odroid C2 Batocera linux
odroidc2 for Odroid and Beelink
Batocera.linux is an open-source operating system that provides a user-friendly interface for retro gaming enthusiasts to play their favorite games on various devices. The Odroid C2 is one of the supported devices for Batocera.linux, and in this article, we will discuss its device requirements.
Device requirements:
- Odroid C2 board
- MicroSD card (minimum 8 GB, class 10 or higher)
- Power supply (5V/2A or higher with a 5.5mm/2.1mm barrel plug)
- HDMI cable
- Keyboard and mouse (for initial setup)
- Ethernet cable or WiFi module (if using WiFi, ensure it's compatible with Batocera.linux)
The Odroid C2 board is a powerful device that can handle most retro gaming systems with ease. It features a quad-core ARM Cortex-A53 processor with 2GB DDR3 RAM and a Mali-450 GPU. It also has four USB 2.0 ports, Gigabit Ethernet, and support for WiFi modules.
Batocera.linux can be installed on the Odroid C2 using a microSD card. The microSD card should be at least 8 GB in size and have a minimum speed class of 10. The operating system and games can be stored on the same microSD card, but it's recommended to use a separate USB drive or hard disk for games to prevent wearing out the microSD card.
To power the Odroid C2, a 5V/2A power supply with a 5.5mm/2.1mm barrel plug is required. A HDMI cable is also needed to connect the Odroid C2 to a TV or monitor. For the initial setup, a keyboard and mouse are necessary.
The Odroid C2 has a built-in Gigabit Ethernet port, but if you prefer to use WiFi, ensure that the WiFi module is compatible with Batocera.linux. You can check the list of compatible WiFi modules on the Batocera.linux wiki.
In conclusion, the Odroid C2 is a powerful device that can run Batocera.linux with ease. With its quad-core processor, 2GB of RAM, and support for various gaming systems, the Odroid C2 is an excellent choice for retro gaming enthusiasts.
link