Huawei Y9 Prime 2019 STK-L21MDV

 Huawei Y9 Prime 2019 STK-L21MDV

Huawei Y9 Prime 2019 STK-L21MDV is a mid-range smartphone launched by Huawei in 2019. The phone comes with a 6.59-inch display, triple rear camera setup, a pop-up front camera, and is powered by an octa-core processor. It runs on Android 9.0 (Pie) with Huawei's EMUI 9.0 interface. In this article, we will discuss the device requirements and installation method for Huawei Y9 Prime 2019 STK-L21MDV.

• Device Requirements:

Before starting the installation process, you need to ensure that your device meets the following requirements:

• The device must be Huawei Y9 Prime 2019 STK-L21MDV.
• The device should have at least 50% battery life.
• You should have a Windows-based PC/Laptop.
• You should have a USB cable.
• You should have downloaded the necessary files for the installation process.

• Installation Method:

Here are the steps to install the software update on your Huawei Y9 Prime 2019 STK-L21MDV:

Step 1: Download the necessary files

• Firstly, you need to download the Huawei Y9 Prime 2019 STK-L21MDV firmware file on your computer.
• You can download the firmware file from the official Huawei website or from third-party websites.
• Make sure to download the correct firmware file according to your device's model number.

Step 2: Extract the firmware package

• Once you have downloaded the firmware file, extract the package using any file extraction software such as WinRAR or 7zip.

Step 3: Enable USB Debugging on your device

• Go to the Settings app on your device.
• Scroll down and select About phone.
• Find the Build number and tap it seven times to enable Developer options.
• Go back to Settings, select System, and then Developer options.
• Enable USB debugging by toggling the switch on.

Step 4: Install the necessary drivers

• Install the Huawei USB drivers on your computer.

Step 5: Boot your device into Recovery mode

• Power off your device completely.
• Hold the Volume Up button and the Power button simultaneously until you see the Huawei logo on your device's screen.
• Release the Power button but keep holding the Volume Up button until you see the EMUI recovery mode on your device's screen.

Step 6: Connect your device to your PC/Laptop

• Connect your Huawei Y9 Prime 2019 STK-L21MDV to your computer using a USB cable.

Step 7: Launch the HiSuite software

• Download and install the HiSuite software on your computer.
• Launch the HiSuite software and select Update.
• Select Local update and browse the extracted firmware package.

Step 8: Start the installation process

• Click on the Start button to begin the installation process.
• The installation process may take some time to complete.
• Once the installation is complete, your device will reboot automatically.

Step 9: Verify the installation

• Go to Settings, select About phone, and check the firmware version to ensure that the installation was successful.

• Conclusion:

By following the above steps, you can install the latest software update on your Huawei Y9 Prime 2019 STK-L21MDV. Keep in mind that installing the wrong firmware package can damage your device, so make sure to download the correct firmware file according to your device's model number.

link