Huawei Nova 10 Pro GLA-AL00
Introduction:
Huawei Nova 8 Pro is a mid-range Android smartphone launched by Huawei in December 2020. It comes with a 6.72-inch OLED display, a Kirin 985 5G processor, 8GB of RAM, 128GB of internal storage, and a quad-camera setup with a 64MP primary sensor. The device runs on Android 10-based EMUI 11 and is powered by a 4,000mAh battery.
In this article, we will discuss the device requirements and the installation method for Huawei Nova 8 Pro GLA-AL00.
Device Requirements:
Before proceeding with the installation process, it is essential to check if your device meets the minimum requirements for the Huawei Nova 8 Pro.
- The Huawei Nova 8 Pro GLA-AL00 should have a minimum of 50% battery life before starting the installation process.
- Ensure that your device is running on the latest firmware version.
- Make sure that you have taken a complete backup of all your data to prevent data loss during the installation process.
- Download the required software and drivers for your device.
Installation Method:
The installation process for Huawei Nova 8 Pro GLA-AL00 involves the following steps:
- Step 1: Enable USB Debugging
First, you need to enable USB debugging on your device. To do this, go to Settings > About Phone > Build Number and tap on it seven times. This will enable the Developer Options menu. Now go to Developer Options and enable USB Debugging.
- Step 2: Download and Install ADB and Fastboot
You need to download and install ADB and Fastboot on your computer. These are essential tools required for the installation process. You can download ADB and Fastboot from the Android SDK platform tools package.
- Step 3: Unlock the Bootloader
Before you can proceed with the installation process, you need to unlock the bootloader of your Huawei Nova 8 Pro GLA-AL00. To do this, follow the steps below:
1. Go to the Huawei official website and create an account.
2. Request for the bootloader unlock code for your device.
3. Once you receive the bootloader unlock code, turn off your device and connect it to your computer.
4.Open the command prompt or terminal window and enter the following command:
adb reboot bootloader
5. Your device will now enter into fastboot mode.
6. Enter the following command to unlock the bootloader:
fastboot oem unlock [unlock code]
7. This will unlock the bootloader of your Huawei Nova 8 Pro GLA-AL00.
- Step 4: Install TWRP Recovery
Now that you have unlocked the bootloader, you need to install TWRP recovery on your device. TWRP is a custom recovery that allows you to flash custom ROMs and kernels on your device. To install TWRP recovery on your Huawei Nova 8 Pro GLA-AL00, follow the steps below:
1. Download the TWRP recovery image for your device.
2. Rename the downloaded file to twrp.img.
3. Copy the twrp.img file to the ADB and Fastboot folder.
4. Open the command prompt or terminal window and enter the following command:
adb reboot bootloader
5.Your device will now enter into fastboot mode.
6.Enter the following command to flash TWRP recovery:
fastboot flash recovery twrp.img
7.This will install TWRP recovery on your Huawei Nova 8 Pro GLA-AL00.
- Step 5: Root Huawei Nova 8 Pro GLA-AL00
Once you have installed TWRP recovery on your device, you can now root your Huawei Nova 8 Pro GLA-AL00. To do this,
link