Huawei MediaPad M3 Lite BAH-L09
Huawei MediaPad M3 Lite BAH-L09 is a tablet that runs on Android OS. Here is a detailed guide on the device requirements and installation method for the OS.
Device Requirements:
- Processor: Qualcomm MSM8940 Snapdragon 435 Octa-core (4x1.4 GHz Cortex-A53 & 4x1.1 GHz Cortex-A53)
- RAM: 3 GB
- Internal storage: 32 GB
- Display: 10.1 inches IPS LCD, 1920 x 1200 pixels resolution
- Battery: Non-removable Li-Po 6660 mAh battery
- Operating System: Android 7.0 Nougat
Installation Method:
Before you start the installation process, make sure you have the following tools:
- A computer running Windows OS
- A USB cable
- Huawei USB drivers
- Huawei Multi-Tool
- Huawei MediaPad M3 Lite BAH-L09 firmware file (available on Huawei’s official website)
Here are the steps to install the firmware on Huawei MediaPad M3 Lite BAH-L09:
- Download and install Huawei USB drivers on your computer.
- Download and extract Huawei Multi-Tool on your computer.
- Download the firmware file for Huawei MediaPad M3 Lite BAH-L09.
- Connect your Huawei MediaPad M3 Lite BAH-L09 to your computer using a USB cable.
- Turn off your device.
- Hold the Volume Up button and the Power button simultaneously until the Huawei logo appears on the screen.
- Release the Power button but keep holding the Volume Up button until you see the eRecovery menu.
- In the eRecovery menu, select the "Download latest version and recovery" option and confirm your selection.
- Wait for the firmware file to be downloaded and installed on your device.
- Once the installation is complete, your Huawei MediaPad M3 Lite BAH-L09 will reboot automatically.
Note: During the installation process, make sure your device is fully charged and do not interrupt the installation process as it may cause permanent damage to your device.
link