Huawei MatePad 4 BAH3-L09
Huawei MatePad 4 BAH3-L09 is an Android-based tablet device that was released in 2020. The device has a 10.4-inch IPS LCD display with a resolution of 2000x1200 pixels and is powered by a HiSilicon Kirin 810 octa-core processor. It comes with 4GB of RAM and 64GB of internal storage, which can be expanded up to 512GB with a microSD card. The device also features a 7250mAh battery and runs on Android 10 with Huawei's EMUI 10.1 skin.
Here are the detailed device requirements and installation method for Huawei MatePad 4 BAH3-L09:
Device Requirements:
- Operating System: Android 10 with EMUI 10.1
- Processor: HiSilicon Kirin 810 octa-core processor
- RAM: 4GB
- Internal Storage: 64GB
- Display: 10.4-inch IPS LCD display with a resolution of 2000x1200 pixels
- Battery: 7250mAh
Installation Method:
Before installing any software or firmware on your device, make sure to backup all your important data to avoid any loss of data. Also, make sure that your device has enough battery charge or is connected to a power source to avoid any interruptions during the installation process.
- Step 1: Download the firmware file
You can download the firmware file for your device from Huawei's official website or from other trusted sources. Make sure to download the correct firmware file that matches your device model number and region.
- Step 2: Extract the firmware file
After downloading the firmware file, extract the contents of the file to a location on your PC. You can use WinRAR or 7zip to extract the contents of the file.
- Step 3: Enable USB Debugging and OEM Unlocking
On your device, go to Settings > About Phone > Build Number and tap on it seven times to enable Developer Options. Then go to Settings > Developer Options and enable USB Debugging and OEM Unlocking.
- Step 4: Boot your device into Fastboot mode
To boot your device into Fastboot mode, turn off your device and press and hold the Power button and Volume Down button simultaneously until the Fastboot mode screen appears.
- Step 5: Connect your device to the PC
Connect your device to the PC using a USB cable. Make sure that the PC recognizes your device and the drivers are installed.
- Step 6: Flash the firmware
Open the extracted firmware folder and look for the "update.app" file. Right-click on the file and select "Run as administrator". The installation process will begin, and it may take a few minutes to complete. Do not disconnect your device from the PC during the installation process.
- Step 7: Reboot your device
After the installation process is complete, your device will automatically reboot. Wait for your device to boot up, and then set up your device by following the on-screen instructions.
In conclusion, Huawei MatePad 4 BAH3-L09 is a powerful tablet device with impressive specifications. The installation of firmware on your device is easy if you follow the instructions carefully. Make sure to backup your important data before installing any firmware on your device to avoid any loss of data.
link